Base

note

Before installing the easifemBase library please make sure that you have installed

• EASIFEM command line application
• Set up the environment variables
• System requirements
• External packages

EASIFEM CLI (recommended method)

You can install easifemBase by using the command line application.

easifem install base

The toml configuration file is given below.

name = "base"
buildSystem = "cmake"
isActive = true
git = 'github.com/easifem/base.git'
sourceDir = "${HOME}/Dropbox/easifem/easifem-base/"
buildDir = "${HOME}/.easifem/easifem/build/base/"
installDir = "${HOME}/.easifem/easifem/install/base/"
buildType = "Debug" # "Debug", "Both"
buildSharedLibs = true
buildStaticLibs = false
usePreset = true
libName = "easifemBase"
targetName = "easifemBase"
projectName = "easifemBase"

intSize = 32 # Default integer size
realSize = 64 # default real size
maxNNE = 128 # maximum number of nodes in an element to consider
maxNodeToNode = 128 # maximum number of node to nodes.
maxNodeToElem = 128 # maximum number of node to element.

runtest = true
license = "GPL3"
buildOptions = [
  "-D USE_OPENMP:BOOL=ON",
  "-D USE_PLPLOT:BOOL=ON",
  "-D USE_BLAS95:BOOL=ON",
  "-D USE_LAPACK95:BOOL=ON",
  "-D USE_FFTW:BOOL=ON",
  "-D USE_GTK:BOOL=OFF",
  "-D USE_ARPACK:BOOL=ON",
  "-D USE_PARPACK:BOOL=OFF",
  "-D USE_SUPERLU:BOOL=ON",
  "-D USE_LIS:BOOL=ON",
  "-D USE_METIS:BOOL=OFF",
  "-D USE_LUA:BOOL=ON",
  "-D USE_INT32:BOOL=ON",
  "-D USE_REAL64:BOOL=ON",
  "-D USE_COLORDISP:BOOL=ON",
]

dependencies = [
  "arpack",
  "sparsekit",
  "superlu",
  "lis",
  "fftw",
  "lapack95",
  "tomlf",
]

Using CMake

easifem uses CMake build system. To manually install easifem from the source we need to perform following tasks.

1. Download the source code from git repository.
2. Configuration the project by using CMake.
3. Build by using CMake.
4. Install by using CMake.

Step-1: Download source code

Download the source code from git repository by using one of the methods:

Git+https

git clone https://github.com/easifem/base.git base

Git+ssh

git clone git@github.com:easifem/base.git base

GitHub CLI

gh repo clone easifem/base base

↢

Step-2: Configuration

After downloading the source code, enter the source directory, and make a build directory.

cd base
mkdir ./build

To configure the easifemBase library you can define following variables:

Variable	Type	Options	Default
CMAKE_BUILD_TYPE	STRING	Release, Debug	Release
BUILD_SHARED_LIBS	BOOL	ON, OFF	ON
CMAKE_INSTALL_PREFIX	PATH	Please specify	$EASIFEM_BASE
USE_OpenMP	BOOL	ON, OFF	ON
USE_PLPLOT	BOOL	ON, OFF	ON
USE_BLAS95	BOOL	ON, OFF	ON
USE_LAPACK95	BOOL	ON, OFF	ON
USE_FFTW	BOOL	ON, OFF	ON
USE_GTK	BOOL	ON, OFF	OFF
USE_ARPACK	BOOL	ON, OFF	ON
USE_SUPERLU	BOOL	ON, OFF	ON
USE_LIS	BOOL	ON, OFF	ON
USE_PARPACK	BOOL	ON, OFF	OFF
USE_METIS	BOOL	ON, OFF*	OFF
USE_SUPERLU	BOOL	ON, OFF*	OFF
USE_RAYLIB	BOOL	ON, OFF*	OFF
USE_GTK	BOOL	ON, OFF*	OFF
USE_LUA	BOOL	ON, OFF*	OFF
USE_GMSH_SDK	BOOL	ON, OFF*	OFF
USE_Int32	BOOL	ON, OFF	ON
USE_Int64	BOOL	ON, OFF	ON
USE_Real32	BOOL	ON, OFF	ON
USE_Real64	BOOL	ON, OFF	ON
USE_COLORDISP	BOOL	ON, OFF	ON

Step-3 and 4: Build and Install

After configuration, you can build and install the library by using:

cmake --build ./build --target --install

An example of configuration step

export EASIFEM_BASE=${HOME}/.local/easifem/base
cmake -G "Ninja" -S ./ -B ./build \
-D USE_OpenMP:BOOL=ON \
-D CMAKE_BUILD_TYPE:STRING=Release \
-D BUILD_SHARED_LIBS:BOOL=ON \
-D USE_PLPLOT:BOOL=ON \
-D CMAKE_INSTALL_PREFIX:PATH=${EASIFEM_BASE} \
-D USE_BLAS95:BOOL=ON \
-D USE_LAPACK95:BOOL=ON \
-D USE_FFTW:BOOL=ON \
-D USE_GTK:BOOL=OFF \
-D USE_ARPACK:BOOL=ON \
-D USE_PARPACK:BOOL=OFF \
-D USE_LIS:BOOL=ON \
-D USE_LIS:BOOL=OFF \
-D USE_METIS:BOOL=OFF \
-D USE_Int32:BOOL=ON \
-D USE_Real64:BOOL=ON

Build options

CMAKE_BUILD_TYPE

If CMAKE_BUILD_TYPE denotes the build type of library. You can read more it at the cmake website.

This variable is string type and it can take following values:

• Release: If CMAKE_BUILD_TYPE is set to Release, then highly optimized version of easifemBase is built without any debugging facility. This option should be used by the users of easifem.
• Debug: If CMAKE_BUILD_TYPE is set to Debug, then library is built with debugging facility. This is useful for developer of easifem. No optimization, asserts enabled, [custom debug (output) code enabled], debug info included in executable (so you can step through the code with a debugger and have address to source-file:line-number translation).
• RelWithDebInfo: optimized, with debug info, but no debug (output) code or asserts.
• MinSizeRel: same as Release but optimizing for size rather than speed.

You can set this option by using --D CMAKE_BUILD_TYPE:STRING=Release.

BUILD_SHARED_LIBS

If BUILD_SHARED_LIBS is set to ON, then position independent code (PIC) shared library will be built. Otherwise, a static library will be built.

Read more

You can read more about BUILD_SHARED_LIBS at the cmake website.

You can set this option by using --D BUILD_SHARED_LIBS:BOOL=ON.

CMAKE_INSTALL_PREFIX

CMAKE_INSTALL_PREFIX is a PATH option, which specifies the location of file system where easifemBase library will be installed. If you have set the environment variables correctly then you can specify it to $EASIFEM_BASE, which is given by $EASIFEM_INSTALL_DIR/easifem/base/

You can set this option by using --D CMAKE_INSTALL_PREFIX:PATH=$EASIFEM_BASE.

Read more

You can read about CMAKE_INSTALL_PREFIX at the cmake website.

USE_OpenMP

• USE_OpenMP if set to ON, the easifemBase library is built with OpenMP with shared memory parallelization.
• The default value is ON
• You can set this option by using --D USE_OpenMP:BOOL=ON.

USE_PLPLOT

• If USE_PLPLOT is set to ON, then PlPlot library will be used for plotting figures. If you have set this option to ON then make sure you have downloaded PlPlot library while building system requirements.
• In case USE_PlPLOT is set to OFF, then PlPlot library will not be used for plotting figures. In this case, plotting may not be possible from easifem library.
• The default value is ON
• You can set this option by using --D USE_PLPLOT:BOOL=ON.

USE_BLAS95

• If USE_BLAS95 is set to ON, then FORTRAN-95 interface to BLAS library will be used. In external packages if you have installed BLAS95 library, then you can set this option to ON, otherwise set it to OFF.
• The default value is ON
• You can set this option by using --D USE_BLAS95:BOOL=ON.

USE_LAPACK95

• If USE_LAPACK95 is set to ON, then FORTRAN-95 interface to LAPACK library will be used. In external packages if you have installed LAPACK95 library, then you can set this option to ON, otherwise set it to OFF.
• The default value is ON
• You can set this option by using --D USE_LAPACK95:BOOL=ON.

USE_FFTW

• If USE_FFTW is set to ON, then FFTW library will be used for Fast Fourier Transform. FFTW stands for Fast Fourier Library in the West. In external packages if you have installed FFTW library, then you can set this option to ON, otherwise set it to OFF.
• The default value is ON
• You can set this option by using --D USE_FFTW:BOOL=ON.

USE_GTK

• If USE_GTK is set to ON, then GTK library will be used for making Graphic User Interfaces. In external packages if you have installed gtk4 library, then you can set this option to ON, otherwise set it to OFF.
• The default value is OFF
• You can set this option by using --D USE_GTK:BOOL=OFF.

USE_ARPACK

• If USE_ARPACK is set to ON, then ARPACK library will be used for computing eigenvalues and eigenvectors of sparse matrices. In external packages if you have installed arpack library, then you can set this option to ON, otherwise set it to OFF.
• The default value is ON
• You can set this option by using --D USE_ARPACK:BOOL=ON.

USE_SUPERLU

• If USE_SUPERLU is set to ON, then superlu library will be used for linear solver. In external packages if you have installed superlu library, then you can set this option to ON, otherwise set it to OFF.
• The default value is ON
• You can set this option by using --D USE_SUPERLU:BOOL=ON.

USE_LIS

• If USE_LIS is set to ON, then LIS library will be used for solving system of linear equations by using iterative methods. In external packages if you have installed lis library, then you can set this option to ON, otherwise set it to OFF.
• The default value is ON
• You can set this option by using --D USE_LIS:BOOL=ON.

USE_PARPACK

• If USE_PARPACK is set to ON, then parallel ARPACK library called PARPACK will be used for computing the eigenvalues and eigenvectors of large sparse matrices. In external packages if you have installed parpack library, then you can set this option to ON, otherwise set it to OFF.
• The default value is OFF
• You can set this option by using --D USE_PARPACK:BOOL=OFF.

USE_METIS

• If USE_METIS is set to ON, then METIS library will be used for graph partitioning. In external packages if you have installed metis library, then you can set this option to ON, otherwise set it to OFF.
• The default value is OFF
• You can set this option by using --D USE_METIS:BOOL=OFF.

USE_SUPERLU

• If USE_SUPERLU is set to ON, then superlu library will be used for linear solver. In external packages if you have installed superlu library, then you can set this option to ON, otherwise set it to OFF.
• The default value is ON
• You can set this option by using --D USE_SUPERLU:BOOL=ON.

USE_RAYLIB

• If USE_RAYLIB is set to ON, then raylib library will be used for making Graphic User Interfaces. In external packages if you have installed raylib library, then you can set this option to ON, otherwise set it to OFF.
• The default value is OFF
• You can set this option by using --D USE_RAYLIB:BOOL=ON.

USE_GTK

• If USE_GTK is set to ON, then GTK library will be used for making Graphic User Interfaces. In external packages if you have installed gtk4 library, then you can set this option to ON, otherwise set it to OFF.
• The default value is OFF
• You can set this option by using --D USE_GTK:BOOL=ON.

USE_LUA

• If USE_LUA is set to ON, then lua library will be used for scripting. In external packages if you have installed lua library, then you can set this option to ON, otherwise set it to OFF.
• The default value is OFF
• You can set this option by using --D USE_LUA:BOOL=ON.

An example of configuration step is given below:

USE_GMSH_SDK

• If USE_GMSH_SDK is set to ON, then Gmsh library will be used for meshing. In external packages if you have installed Gmsh library, then you can set this option to ON, otherwise set it to OFF.
• The default value is OFF
• You can set this option by using --D USE_GMSH_SDK:BOOL=ON.

USE_Int32

• If USE_Int32 is set to ON, then 32-bit integer numbers will be used as default integers. Please do not set this to OFF.
• The default value is ON
• You can set this option by using --D USE_Int32:BOOL=ON.

USE_Int64

• If USE_Int64 is set to ON, then 64-bit integer numbers will be used as default integers. By default it is set to OFF.
• The default value is OFF
• You can set this option by using --D USE_Int64:BOOL=ON.

USE_Real32

• If USE_Real32 is set to ON, then 32-bit real numbers will be used as default real numbers.
• The default value is OFF
• You can set this option by using --D USE_Real32:BOOL=ON.

USE_Real64

• If USE_Real64 is set to ON, then 64-bit real numbers will be used as default real numbers. Please do not set this to OFF.
• The default value is ON
• You can set this option by using --D USE_Real64:BOOL=ON.

USE_COLORDISP

• If USE_COLORDISP is set to ON, then display in terminal will be colored.
• The default value is ON
• You can set this option by using --D USE_COLORDISP:BOOL=ON.